Reply to thread

Message: [QUOTE="PSD POWER007, post: 1038819, member: 13870"] All I know, is that I've had oring failure 3 times on my injectors. All three times the truck would start normal with oil temps below about 80* and run pretty good other than calling for a lot more IPR duty. Once the truck was shut down, it would not start again until the oil temps dropped below 80* again. All three times the upper oring ruptured. All three were in different holes. Rumor has it that PIS uses DiPaco rings. I eventually pulled all 8 injectors out and all showed signs of deterioration in under 10k miles. Tim sent me 8 sets of Alliant rings and no problems since. Tim went above and beyond for me. Top notch customer service. [/QUOTE]

Verification

Random media

photo_3_

82CC851E-B856-4348-A226-E34DDA155B4E

My ranch

F-525

Dashdaq custom mount by Ricky

INJECTORS B/W

20131228_212437

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,018 (members: 0, guests: 1,018)

Top