HPOP Removal? (Vid)

imelmo · Jan 20, 2012

How accurate is this video for hpop removal on a 6.0? Mine's an '04.5 if it makes a difference. Any tricks or suggestions that he left out?

http://www.youtube.com/watch?v=UuTKDPZhMdk

.

windrunner408 · Jan 20, 2012

No that is pretty much it. The hardest part is removing the turbo. I forgot about the egr cooler because I dont have one. No real tricks. Just make sure you torque everything down to spec because those bolts on the branch fitting can snap pretty easily if over torqued.

chappy · Jan 21, 2012

so only the 05 up have that stc fitting problem or does the 04.5 also? I guess i'm thinking I read the 04.5 have a different system.

PowerStrokeEnginuities · Jan 21, 2012

04.5 still has round pump without fitting

PowerStrokeEnginuities · Jan 21, 2012

But yours does have the high pressure oil rail plugs under the valve covers. Another common problem.

Goose · Jan 21, 2012

Cool vid. Saved it

imelmo · Jan 21, 2012

Goose said:
Cool vid. Saved it

Yeah, he's actually got a few handy ones on there.

.

patrickke · Jan 21, 2012

What pump are you going with now Danny?

imelmo · Jan 21, 2012

Ordered a Dieselsite high output pump. Won't be here 'til mid to late February though.

.

windrunner408 · Jan 21, 2012

Has Bob finally came out with an Adrenaline version for the 05-07 6.0s yet?? Is that what you are referring to??

imelmo · Jan 21, 2012

windrunner408 said:
Has Bob finally came out with an Adrenaline version for the 05-07 6.0s yet?? Is that what you are referring to??

No, he just has the high pressure oil SYSTEM for the '05-'07's: http://www.dieselsite.com/highpressureoildeliverysystem-20045-2007.aspx . My truck is an '04.5. An '05-'07 can still use that pump though. Just have to switch to some other things with it:

Note for 2005-2007: you can only use this if you retrofit all your rails and HPOP components out to the 2004 version

.

Silverback · Jan 21, 2012

Only thing I do differently is remove the 8mm bolt holding the cooler to the intake, gives you a little more give on the cooler. And you don't HAVE TO remove the heat shield, its all about getting the right angle of the dangle when your pulling the cover off.