Reply to thread

Message: [QUOTE="SUPERIOR OFFROAD INC., post: 149219, member: 3431"] Ok so after the buildup (190's w 75% over nozzles) AD II, Sump & Strictly diesel RR i let the truck run for about 2-3 Hrs at an idle to let everything heat set back in ect. Here's the skinny: Truck was a PITA to get started the first time as usual, once started it ran perfect but everytime i shut it down it would take 3 x more cranking to get it started again. Let it warm up again this morning for about 45 minutes while i was cleaning the shop. Took it out for it's break in run, made it 2 miles at a moderate pace about 3/4 into the pedal. When i stopped at the stop sign the truck was idling rough and would not smooth back out. Fuel Pressure off the AD II is +/-55 psi and stayed the same the whole time. RR pressure is about the same +/- a couple PSI. It doesn't matter what i do to the AD II or the RR PSI setting wise it will not level/smooth out. It stumbles up to about 1000 rpm them its silky smooth all the way to full pedal, there is still a ton of power and its smooth on the highway. Any ideas? Also the FICM is un-tuned and i am waiting on tunes for Innovative. I think its a fuel/timing issue but has anyone had the same problems or have any ideas? Thanks guys! [/QUOTE]

Verification

Random media

IMAG0206-1

2013-01-31_21-06-33_882

In the cemetary!

MPD_Kit

IMG_20160814_104240964

100904_132309

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

IMG_20140104_191937_683

122710_066

100917_195156

Latest posts

N
Ford 7.3 Passenger Bank Dead
- Latest: NitroJoe
- Today at 11:47 AM
7.3 Tech
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Today at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Today at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech

Members online

Total: 753 (members: 2, guests: 751)

Top