Reply to thread

Message: [QUOTE="Pizza pig, post: 934997, member: 1161"] What would you like to see? We can build whatever you want. There are limitations, and there are only so much a nozzle can FLOW. Thats what a lot of people dont realize. the stock nozzle is only capable of flowing about 170cc of fuel. you can cut all you want, but flow is flow. You can machine the body to hold however much fuel you want, but it wont all come out the nozzle at max pulse width. We did some testing, at 4000 rpm, and 2.4ms we get 152cc out of a stock injector with no mods done to it, and a 30% nozzle. The injector next to it was the same but a 100% nozzle, that flowed 160cc. Flow is flow. We are going to be doing some testing here soon with the RCD high volume pump and 210+ cc injectors and dyno results. [/QUOTE]

Verification

Random media

step_111

eleanor_part_two_16_

My 2011 F250 Lariat

20160526_092556

Misc_V-Drive_560

eleanor_part_two_49_

'07 5.9 Cummins

my truck

tire2

DSCF3351

014

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Mjdavidson1

Total: 548 (members: 1, guests: 547)

Top