• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

Inventory Clean Out Part II

BDP Sales

New member
Joined
Jun 1, 2011
Messages
369
Reaction score
0
Location
Murfreesboro, TN
Just cleaned the shop up again this past weekend and have some left over parts that need to go. All parts are brand new in box, unless stated otherwise.
All prices include ground shipping anywhere in the lower 48.

1. Garrett 1.15 non gated housing (part #700213-0005) w/ van flange adapter $400

2. BTS Valve Body for 4r100 Transmission. Setup for towing and 450hp
$225 plus core, or $400 w/ no core

3. Performance Injection Systems 160cc/100% over, single shot injectors.
$1,500 plus cores, or $2,000 w/ no cores

4. Airdog 100 for 99.5-03 7.3L Powerstrokes. Part #A4SPBF168
$515

5. Airdog II 165 for 99.5-03 7.3L Powerstrokes. Part #A5SABF192-This box has been opened and looks rough, but all the parts are there and never been installed
$500

6. S&B Dry Cold Air Intake for 2010-2012 Dodge Cummins 6.7L Part #75-5057D
$250

7. H&S Performance GM Duramax Pillar Mounting Pod WITH SPKR Part #33307
$60

8. 4 Moroso Oil Pans for 6.7L Powerstroke (will have pictures up in a little bit of them.
$450
 

BDP Sales

New member
Joined
Jun 1, 2011
Messages
369
Reaction score
0
Location
Murfreesboro, TN
8. 4 Moroso Oil Pans for 6.7L Powerstroke (will have pictures up in a little bit of them.
$450


null_zpscf898909.jpg
 

Magnum PD

Active member
Joined
May 18, 2011
Messages
9,566
Reaction score
8
Location
VA
The pump has a regulator, but do I still use the regulator after the heads?
 

ncdzl

In the Brig (Banned)
Joined
Mar 30, 2013
Messages
624
Reaction score
0
The pump has a regulator, but do I still use the regulator after the heads?

Does the adII internal regulator regulate on the feed or does it return to the pump and regulate the return side?
 

Latest posts

Members online

Top