Lowered 05+ 4wd's

rpm-inc · Oct 27, 2012

I know this has been gone through a few times. Don't remember anything being said about the trackbar. Stock length and bracket still work fine?

08_6.4stroker · Oct 27, 2012

I'm working on lowering my 08 as we speak, and I'm using stock bar and bracket.

Aaron S · Oct 28, 2012

I cant imagine a good reason that the trac bar bracket would need to be replaced.

The only reason the trac bar its self would need to be replaced is if the axle is pushed out to the right side of the vehicle once it is lowered. The right side tire would stick out of the wheel well and the left would be set in.

ford rules · Oct 28, 2012

Most I see lowered just use gasser springs and that it it seams like.
Never heard of tracbar issues.

6.4psd916 · Oct 28, 2012

Mine is fine, no issues

rpm-inc · Oct 28, 2012

Thanks.

Smokyred · Oct 29, 2012

I'm lowering my 08 with the stock track bar/bracket. Trevor@PMF can build shortened track bars, I may pick one up later on.

Dave

Frank_C · Oct 30, 2012

I'm in progress of lowering mine. I picked up a shortened adjustable track bar from Trevor at PMF

smokinstroker · Oct 30, 2012

Frank_C said:
I'm in progress of lowering mine. I picked up a shortened adjustable track bar from Trevor at PMF

going to be selling your old bar and coils..

i wont need shocks

Josh@DirtyDiesels · Oct 30, 2012

how are you guys lowering the fronts other than just 5.4 springs? any better options?

strokin'_tatsch · Oct 30, 2012

Anybody lowered with 4 link up front? I'm doing '05+ axles in an OBS and would like to run 4 link up front, but don't want it lifted much, if at all. Would prefer to be slightly lower than stock if possible.

Frank_C · Oct 30, 2012

smokinstroker said:
going to be selling your old bar and coils.. i wont need shocks

I've had multiple people pm me about my Icon parts already haha.
I haven't even listed it yet, take it easy fellas!

dzlpwr said:
how are you guys lowering the fronts other than just 5.4 springs? any better options?

Cutting the stock coils is the only other option I've heard of

Josh@DirtyDiesels · Oct 30, 2012

Frank_C said:
I've had multiple people pm me about my Icon parts already haha.
I haven't even listed it yet, take it easy fellas!

Cutting the stock coils is the only other option I've heard of

looks like I'll either be cutting mine or building an air setup for the front. back sits how I like it but front is tough