Lowered 99-07 cc/sb's pictures

[AKHILF]

I'm really wanting to go back to stock ride height and drop the back down to level the truck out and get some 22's or 24's looking for any input on the subject from the best way to go down to maybe some opinions on wheel choice I don't want the wheels to stick out to much right now I have a 20x10 with a -24 offset and that's the furthest out I would want. Thanks for the help and bring on the pictures!!

 

[bruce]

this is an 01, ass dropped 22x9.5 kmc hoss with a 0mm offset 305/45/22 nitto 420s

 

[RBernardi]

 

[bruce]

here's some more
the wheels don't stick out

 

[RBernardi]

 

[RBernardi]

 

[RBernardi]

Derailed from the topic, but this was done by a local shop about 7 or 8 years ago. Pretty bad.

 

[AKHILF]

Hey rb do you know how that red cc was dropped? And bruce what did you do to drop your back down? And do you think you could go lower if you wanted? Looks like you still have a rake

 

[bruce]

i don't know why the ass always looks high in the pictures but i can reassure you the the ass is lower than the front. i took the block out, actually i think i took both out. i need to get some short u-bolts and see what i can do

 

[RBernardi]

I dont know the suspensions mods. He didn't have any info in is profile sorry man.

 

[Lowdown89]

Derailed from the topic, but this was done by a local shop about 7 or 8 years ago. Pretty bad.

It looked so much better like that than ith the green and black abortion of a paint job it got after it sold!

 

[RBernardi]

I have never seen it black and green. When I had my bagged trucks word on the street was that it was sold to someone down about a half hour away, and now it feel off the face of the earth.

 

[RedSmokey]

Hey rb do you know how that red cc was dropped? And bruce what did you do to drop your back down? And do you think you could go lower if you wanted? Looks like you still have a rake

I dont know the suspensions mods. He didn't have any info in is profile sorry man.

Its a 2wd truck. Probably just a DJM kit with the 3" drop I-beams in the front and shackle/hanger in the rear

 

[AKHILF]

So Bruce you just have the leaf riding on the axle?

 

[Just stroken]

heres mine

 

[Lowdown89]

Chris your truck looks sick man! Have you gotten the new engine squared away yet?

 

[TxFireman1972]

Its a 2wd truck. Probably just a DJM kit with the 3" drop I-beams in the front and shackle/hanger in the rear

yeah, you definitely wont be going that low with a 4wd. Axle to frame clearance becomes a problem really quick on the 4wd trucks.

 

[RedSmokey]

yeah, you definitely wont be going that low with a 4wd. Axle to frame clearance becomes a problem really quick on the 4wd trucks.

Exactly.

 

[Just stroken]

Chris your truck looks sick man! Have you gotten the new engine squared away yet?

truck.runs great now couldnt be any happier n.how ut runs

 

[AKHILF]

Hey chris how's yours lowered?