Reply to thread

Message: [QUOTE="tbsimmons, post: 1376838, member: 2026"] Might be too late but I am doing the following on my dually. Get energy suspension bushings and put in the lower over loads so they will hit the main pack quicker. PN 9.9102G (G is just for black ones). I am going to bolt them through the bottom overloads. I am also putting some on the top overload if you have them. PN 9.9109G. I am just going to remove the rubber bumper from the stock mounts and bolt these in. I have a little more than 4" before the up overloads make contact so they are not really being used at all. Plus 4" sag in back is too much. I have air bags also but the suspension on this dually is much softer and squats more to get to the overloads than the 08 F450 did. I need to either max the air pressure out or let the truck on the overloads with my fiver on the truck or the ride is crap. [/QUOTE]

Verification

Random media

1511MG-1011

20161122_112113

Always changing to make it a home on the road.

IMAG0330

20171227_152841

IMG_20110628_1536351

20103

450R

2008 6.4L pic14

CID&FDCS

Trucks

BODY1

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 11:41 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,190 (members: 0, guests: 1,190)

Top