Reply to thread

Message: [QUOTE="juniort444e, post: 141689, member: 797"] I talked to matt a few times not long ago about tuning the current setup. He didnt feel safe tuning it so after talking we both concluded that he wasnt going to tune it until i got forged or a built block. That was fine in my book and very respectable of him. On the other hand i got some tuning from my current tuner, not sure what he did or anything, all i know is it ran very hott and smokey, some what laggier then others said it should have ran. Not a problem as i learned to drive around it. FOr all that may not know, i bought the injectors and turbo and everything else on false hopes i had forged. I tryed to check while the motor was still in the truck, and my fat head wouldnt fit to well. So i pulled the trigger any way on everything. While installing everything i had to pull the motor for a number of reasons and only then did i get a clear sight in that tiny little hole and seen pmr's. I knew it would blow sooner or later being that everything i had wasnt ment to keep pmr's happy no matter how anyone tuned it. No im stuck on either build this motor, with no transportation to travel from school to parents where my truck is at, about an hour ride each way. OR buy this truck and slowly build my truck, OR swap the motor out of the "maybe soon new to me bought truck" into mine with all my stuff on it since it is a 99 with forged and finally get Matt's tuning. Thats my life's problems right now. [/QUOTE]

Verification

Random media

bumper_idea

wax

0033

Memorial_11_054

Interior

photo_41

Underside_21

248612_222002857818045_100000249972728_922376_6696814_n

Latest posts

Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- 42 minutes ago
7.3 Tech & FAQ
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 7:47 PM
6.4 Aftermarket
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket

Members online

hawgdoctor

Total: 1,061 (members: 1, guests: 1,060)

Top