Reply to thread

Message: [QUOTE="Jeremy, post: 607045, member: 848"] I'd bet it went into protection mode, when the PCM checked its Vin number against the other modules in the truck. If you can, try and get a vin number from someone here with the same truck as you but with a ZF6. ESOF, Lariat, Climate control, etc...Pull their AS-Built codes for each module from FMC-dealer.com. Are the manual clusters in the 08's different from the autos? They were in the older trucks(trans temp gauge vs batt), but I have not honestly been inside a 08+ with a ZF6 so I don’t know. Anyway, do an as-built programming of your truck with ZF6 trucks as-built info, I don't know if you can change the vin number on a 08, the 03-07's you could. Hopefully you can enter your vin number. Its going to take someone whose pretty good with IDS to pull this off, But I think it can be done. Great Post BTW, I also prefer to row my own gears, especially when towing, that why I had the US gear OD behind my Zf6 in my 2000. [/QUOTE]

Verification

Random media

Trailer

IMAG0570

NL60PACSK

hella_bright

ADcarbon1

IMAG0071

IMAG1090

Next project

AD2

Trucksetup

2011-11-09_18-15-02_573

Latest posts

A few turbo questions and a rant
- Latest: powerlifter405
- Today at 12:08 AM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Yesterday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Yesterday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

No members online now.

Total: 1,007 (members: 0, guests: 1,007)

Top