Reply to thread

Message: [QUOTE="Notneb, post: 1373175, member: 22077"] Ok so I got the H&S Fuel Filter Conversion and CCV Box in place mod. Basically all the CCV mod is a fitting to be able to use the stock CCV filter in place but still vent to atmo/exhaust. I have the Midwest SS Intercooler Piping kit, and I believe there was some concerns whether the CCV box would still fit. Answer is: yes, fits fine, no issues at all. The only issues I had were with the fuel filter conversion, it was too tall sitting in the stock cradle, so I just cut the bottom of the cradle out and now she juuuuust fits. I will just do away with the stock cradle after I get measurments to fab up a better mount. Just a note: for anyone doing this like I did, where I already had the CCV filter removed, make sure you pull the o-rings off your CCV mod blocks! [ATTACH=full]164266[/ATTACH] ^^^ You guys like a tight fit right?! [ATTACH=full]164267[/ATTACH] ^^^Overhead so you can see where I routed the hose. [/QUOTE]

Verification

Random media

Beeeeeeeer

5C3T-18C815-CB RADIO

Picture_780

Misc_038

dual_pumps5

Capone

10525814_1396147747355375_3652222228889044508_n

iphone_pics_238

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 729 (members: 0, guests: 729)

Top