need an 08+ bed measurement favor.

slc6oh · Aug 17, 2015

lookin at a used roll n lock tonneau for my short bed 2006 f350, just off of rnl's web site there is like a .6" difference in length between the 08+ and my 06, witch I think I can come up with something to make up for that fairly easily, but the width is what I am concerned about, anybody with an 08+ have a tape measure handy an mind grabbing me an inside bed rail to inside bed rail measurement quick??

cant find anything online, any help would be greatly appreciated.

thank you in advance.

-justin

Lipka101 · Aug 17, 2015

64.5 front and tapers to 63.5 in the back

Sent from my SAMSUNG-SM-G890A using Tapatalk

slc6oh · Aug 17, 2015

Lipka101 said:
64.5 front and tapers to 63.5 in the back

Sent from my SAMSUNG-SM-G890A using Tapatalk

thanks dood!! that's close enough that I think the 08 tanneau will work in my 06

slc6oh · Aug 17, 2015

Anyone by chance modded a roll n lock for a 2008+ to fit in a 2006? im sure shimming the front box towards the rear of the bed .5" should be enough to make it work, but I could be wrong.

strokinpower · Aug 18, 2015

the beds are identical...

sootie · Aug 18, 2015

only difference with tonneau covers is the length due to covering the wider top of the 08+ gate

slc6oh · Aug 18, 2015

And i knew they knew they were the same just seeing diffrent bed lengths on the website kinda had me concerned. Ill make it fly. Thanks fer the input guys:blitzed::rockon:

slc6oh · Aug 18, 2015

got it and threw it in, as expected, the gap at the tail gate is off a bit, and my bent tail gate makes it look even more off, but ill deal with it till I can get the 08+ tail gate

thanks again for the replies everybody