Reply to thread

Message: [QUOTE="TyCorr, post: 1055646, member: 1451"] If im seeing the photos right, that doesnt tell us anything. There is a drainhole in the block to keep the valley from filling up with oil/fuel/water. You have to be extra careful because on your particular setup with the manual, you WILL ruin your clutch once that oil gets into the lining. Get a piece of tubing and force it into the drain hole and extend it down far enough that it can't wind up in your bellhousing. Then you need to get up on top of the motor with a flashlight and see where the leak is coming from. It might be a hpo oil line or the pump. But look in the valley of the motor as its just speculation and common problem spots im suggesting right now. [/QUOTE]

Verification

Random media

6_0_intake_3

Weight Reduction,one part at a time

under the hood

ICP-DC_Swamps_StgII_175

20170122_124732

he351ve

2012 f250 sagging

9568F99D-078C-4D87-B7EA-CE1FB2EF75C5

My 6.0 Powerstroke

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 858 (members: 0, guests: 858)

Top