Reply to thread

Message: [QUOTE="FX4 F2-Fifty, post: 235887, member: 245"] Keep in mind that i already had a Full system that consists of 1/2 Draw straw to 5/8in Pushlok hose Aeromotive Marine A1000 to 1/2 line to Fuel block to braided lines to front of the heads. Solid lines with banjos on the back of the heads to braided lines to Aeromotive Marine Regulator return "tees" into the factory return line from the fuel bowl. Where the factory pump was connected to the return lines i have a piece of steel line that connects to the factory return line. Now i just added Baldwin Filter base FB1311 (2) $17.99 locally Baldwin Fuel/Water Separator BF1212 (1) $9.xx locally Cat 2 micron 1R-0750 (1) $29.99 locally I wanted to run everything in the order of Tank, Fuel/water Separator, Pump, Cat 2 micron, engine. As you might know there is not too much room under the hood for a extra, big filter. Heres the Pics. Any questions or want pictures of anything in particular just ask. Also just look through that album on photobucket and theres pictures of everything. Now to clean up my mess of wiring under the hood and fab up a bracket for the Cat Filter. [ATTACH=full]78527[/ATTACH] [ATTACH=full]78528[/ATTACH] I left room that if i wanted to run 2 filters pre-pump i could. [ATTACH=full]78529[/ATTACH] [ATTACH=full]78530[/ATTACH] [ATTACH=full]78531[/ATTACH] [/QUOTE]

Random media

stacks4

photo_5

IMAG0329

UNDER_HOOD_FUSE_PANEL

pistons

original_eleanor

Resampled952011-11-059517-05-5395567

led_tail_3

574

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Thursday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Thursday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 822 (members: 0, guests: 822)

Top