Reply to thread

Message: [QUOTE="Bustedknuckles, post: 677262, member: 2197"] 2008 F-250 Super Duty 6.4 Customer Concern: The engine won't start, the starter won't engage. It came in with a faulty diesel particulate filter and sensor, they were replaced. The truck started, was driven out of the shop and now won't crank. It has a code P242D in the Powertrain Control Module (PCM). Average Reported Mileage: 65000 Tests/Procedures: 1. Locate the Exhaust Gas Temperature (EGT) Sensor #3 which is the last temperature sensor at the back of the diesel particulate filter in the exhaust. It is a 2 wire sensor with a Yellow/Green (YE/GN) and Yellow/Orange (YE/OG) wire. Verify the sensor is properly connected and that the pins of the connector are making good connection to the sensor. 2. If the connections are OK, check the resistance of the sensor. The sensor should show roughly: 237 ohms @ 122*F 275 ohms @ 212*F 348 ohms @ 392*F If the sensor is showing extremely high resistance or open circuit, suspect a faulty sensor. Replace as needed and recheck operation. [/QUOTE]

Verification

Random media

2012-04-21_12-27-59_993

IMG_20130423_192721_897

999003_4492013878838_1321891142_n

6.7 Ford CCV bypass

Wheels for sale

20180115_080935

17_Intake_Product_Photo

97 F350 4x4

Swamps Timing 1

20151116_172104

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 803 (members: 0, guests: 803)

Top