Reply to thread

Message: [QUOTE="gnxtc2, post: 1504745, member: 1414"] Swapped IDMs just to be sure and still no start. Checked everything over again. No signs of burnt wires. Did another buzz test with the original IDM and it passed. Had a friend crank the truck while I listened for the injectors....dead silence, no injector noise. Plus, have no white smoke out the tailpipe. With the scanner hooked up, there is no pulse width.....hmmmm. Gotta break out the shop manuals for the schematics unless someone knows which wire goes between the PCM and IDM. Any chance the PCM took a dump? [url]https://youtu.be/pVI3RAxZO0w[/url]. Billy T. [email]gnxtc2@aol.com[/email] [/QUOTE]

Verification

Random media

My white 06 f350

2012-12-03_15-11-49_949

White_monster intake

528

2011-10-29_10-39-17_621-1

mpd_kit_1

photo_3_

IMAG0030

Spray adhesive that sticks to the rubber and plastic

2012-05-05_11-41-58_863

old truck

photo_21

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Powerstroke Cowboy

Total: 1,149 (members: 1, guests: 1,148)

Top