Reply to thread

Message: [QUOTE="Harleyx, post: 1310841, member: 21993"] Got the stock turbo off and today's the big install day. Big thanks to all the guys who have reached out and helped and gave me great info along the way. Build is as follows. S369sxe .91 divided t4 hd up pipes with 100 psi bellows metal custom ic pipes 100 psi burst rated boots 340 150 hybrids First set of 6 0 electric dual hpops 58 volt ficm twisted stage 4 with pi convertor 2200 rpm stall Erics tunes Rcd rods .030 over pistons Pistons were machined, ceramic coated bowls with the edge lips removed , teflon coating skirts, cry treated pistons , final compression around 15.5:1, broken in with 3 k miles on it with a stock turbo being nice dsp crank case vent eliminated PSE regulated return with an a1000 and rudys sump Brand new heads, rcd push rods, Hamilton springs custom pedestal , feed and drain lines by dsp jb will only be pushing it on fuel only hp predictions ???? Thanks to all who have helped!!!!very excited [/QUOTE]

Verification

Random media

P2230002

IMG_20161130_080821591

eleanor_dash_1_

exit_2_5

intercool4

front2

95_Bronco_conversion_pics_004

Mexico

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Yesterday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Yesterday at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

No members online now.

Total: 634 (members: 0, guests: 634)

Top