Reply to thread

Message: [QUOTE="Strokersace, post: 1432033, member: 622"] When I did mine, I trimmed the front of the crossmember and modified the 05 trackbar bracket to work. Some don't agree with it but my angles were right and had no bump steer or issues. 3 holes drilled into crossmember and 2 tapped into frame. I didn't want a weld on version. Honestly though, Frank's right in that fabbing one and welding will be easier and quicker for the 05+ suspension swap. I just converted the truck back to leaf springs with a pmf rsk and 04 SD axles. (Selling the obs and put the coil suspension under the 04) Very glad I didn't weld a bracket to the frame. Using the SD trackbar from the 04, nobody makes a bracket for the obs, so I'm making my own bolt on bracket using the same mounting locations as the 05 did. It's alot of work but will be worth it. Use the 05+ steering box and pitman arm. Other than reaming out the frame bolt holes and using 6.0 factory headbolts to mount it, it plugs and plays... [/QUOTE]

Verification

Random media

IMAG0213

BB3C04D5-BB5B-4F75-9207-BBD824089A43_1

09 6.4

Got the decals

duals1

2006 F350 KR Utility bed

step_7

dustin

Latest posts

Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- 45 minutes ago
6.4 Aftermarket
Fuel sending unit and wheel studs
- Latest: psduser1
- 56 minutes ago
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Yesterday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket

Members online

No members online now.

Total: 878 (members: 0, guests: 878)

Top