Reply to thread

Message: [QUOTE="jschildm, post: 1567961, member: 1864"] I either can't find the channel in forscan (slip, this one shows in the torque app but i have never seen it above 0) or the channel shows up but I am not convinced is working correctly (TCC Solenoid duty cycle, never changes even when the TC is locked). [USER=1654]@Mark Kovalsky[/USER] can the TCC Solenoid be changed by dropping the pan, or does the transmission have to come all the way out for that? If it doesn't have to come out I'll probably try that first, but if it does have to come out, then I'll probably just do the TC while I am at it. I have been driving the truck some and it has gotten to where the code is set anytime I drive it far at all, but seems to function normally once the TC is locked (sometimes have to let off the accelerator to get it to lock, especially the first time of the trip). [/QUOTE]

Verification

Random media

1244070_485238398250087_907487000_o

Underside Truck Photos

20130927_154557

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

f350

Old and new STC fitting

Hot_Rod_RAcer

old trucks

08 excursion

Latest posts

A few turbo questions and a rant
- Latest: ju015dd
- 24 minutes ago
7.3 Aftermarket
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Monday at 8:52 AM
7.3 Tech
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

Total: 1,305 (members: 2, guests: 1,303)

Top