Parting out truck

[baderic03]

Time to do a 12v in the truck


Bellowed ss up pipes with oil drain lines and down pipe $650*

ii *s475 with 1.15 turbine housing T4 1500miles on it $1000

Gen3 hpop with new 17* pump $600*

Modded Idm $250*

450cc injectors will either have new 400% or 200% nozzles let me know and can get what ever put on $2100*

Long block minus hpop and injectors $500*

Custom TS 6 position chip I can have re-fleshed to what ever you want $350*

Will ship on your dime*

PayPal and credit cards accepted*

Call or text 781-706-6629

 

[Dieselboy.]

Whose doin the injectors ?

And whose modded IDM ?

 

[baderic03]

Injectors will either be done by nate or Jim. And Idm is my Idm that I mod. I have some well over 50

 

[6.0 p-stroke]

Location? I can't see on tapatalk.
How many miles on the long block?

 

[baderic03]

Long block 215k. Always had 15/50 synthetic race oil in it

 

[baderic03]

All parts are pending sale besides the long block

 

[dentexpowerstroke]

Pm about the block. Does it have 910s or studs?

 

[baderic03]

I have new 910s never installed and no studs never lifted the heads making 50psi of boost

 

[Powersmokin32]

Pm sent

 

[dentexpowerstroke]

I'll text you or call you about it later and see what we can figure out

 

[Derek@Vision Diesel]

You never studded the 7.3 and you are already giving up and moving on because you can't make the power you want?

interested to see where this ends up!

 

[baderic03]

No never studded it I ain't going to spray to pull so what's head studs going to change in this aspect.

 

[Derek@Vision Diesel]

No never studded it I ain't going to spray to pull so what's head studs going to change in this aspect.

How many times did you pull with the 400% nozzles?

 

[baderic03]

Only thing left is the long block

 

[dentexpowerstroke]

I'm finding out about shipping on the motor to hopefully snag that from you

 

[baderic03]

Let me know I'm pulling it tomorrow

 

[baderic03]

Everything is sold. Mod you wanna delete post please

 

[Magnum PD]

What rods did you use?

 

[dentexpowerstroke]

It was just an obs block.

 

[baderic03]

My truck made 50psi of boost and 60psi of drive pressure under wot No need for studs