Reply to thread

Message: [QUOTE="JCart, post: 1560223, member: 1238"] All right checked all fuses, they’re good. Checked IPR plug for loose insulation and shorting nothing. Pulled out PCM pulled cover off and looked at circuit board, no burnt smell nothing looked melted. Cleaned ground wire for PCM on inside fender by hood spring. Grounded (with jumper cable) to fender brace by battery and Air cleaner, for solid grounding for PCM. Hooked autoenginuity to port inside cab and it wouldn’t connect to PCM. Idle module screen said C err, no “wait to start” light, but brake light and glow plug light do light up. Kinda perplexed…. Any suggestions be appreciated Thanks j [/QUOTE]

Verification

Random media

My OBS E-Fuel system

2017 Headliner Re-Do

IMAG0030

step_12

296177_10150345342119170_235203259169_7912046_508099034_n

psa_camo_back

My 2011 F250 Lariat

phone_2017_472

befor an after

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 522 (members: 2, guests: 520)

Top