Reply to thread

Message: [QUOTE="JSchuricht, post: 1180911, member: 5768"] I took a few pics before shipping the old parts back. Here are the brackets that clamp on the tierod. The new ones are about 1/4" longer. They also have shorter bushings presumably to help keep the shocks level with the new center bracket. [ATTACH=full]149570[/ATTACH] New center bracket on right, old on left. [ATTACH=full]149571[/ATTACH] Top down view of the old center bracket. [ATTACH=full]149572[/ATTACH] Top down view of the new center bracket, notice the gap difference. [ATTACH=full]149573[/ATTACH] Much more clearance. [ATTACH=full]149574[/ATTACH] With a Crane cover, the driver side bracket was just touching at full lock so the corner had to be ground down slightly. [ATTACH=full]149575[/ATTACH] Ran into one new issue, likely from using bolts from the original brackets with new brackets. The bolts are way too long. [ATTACH=full]149576[/ATTACH] Fortunately I had some thick washers laying around. [ATTACH=full]149577[/ATTACH] Random picture of the center before tightening everything down. [ATTACH=full]149578[/ATTACH] The sun was not at a good angle but here's a pic of everything installed. There is a larger pic behind this one if you click on it. [ATTACH=full]149579[/ATTACH] [/QUOTE]

Verification

Random media

2012 f250 sagging

1996 F250 460

My OBS E-Fuel system

2011-11-23_12-26-15_64

exploded

gate

led_tail_3

front_axle_swap10

sept_29_10_1691

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Waldon

Total: 455 (members: 1, guests: 454)

Top