Reply to thread

Message: [QUOTE="Mark13, post: 1205527, member: 10098"] It was a multi step process. First I took all the lights out of the bed, then sanded it with 600 grit, then 800 grit, cut it twice with a yellow airway with brown rouge, hit it again with a green airway with green rouge, then hand polished it with california customs metal polish. The end result is what you see in the picture. The bed is a Hillsboro Few more pictures while I was working on it. Transfer tank: [ATTACH=full]151148[/ATTACH] Corner is sanded a few times and hand polished twice. The rest of the edge as you can tell hasn't been touched. [ATTACH=full]151149[/ATTACH] Sanded, hit twice with the yellow wheel. I ended up going back and sanding the whole bed again after I cut it once to get it smoother. [ATTACH=full]151150[/ATTACH] Sanded, you can see just before the bottom of the picture where I stopped cutting on my first pass with the airway. [ATTACH=full]151151[/ATTACH] This rail was mostly done aside from touch up and hand polish. [ATTACH=full]151152[/ATTACH] [/QUOTE]

Verification

Random media

IMAG1026

RCD four link

P5270124

IMAG1044

20200531_191412

imagejpeg_21

my truck!

photo_29_

20160129_164521

eddie_s_truck_fire

My '04 6Leaker

Latest posts

Georgia Roll Call
- Latest: RascalMafia
- 59 minutes ago
Southeast US
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 8:00 PM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US

Members online

No members online now.

Total: 1,374 (members: 0, guests: 1,374)

Top