Reply to thread

Message: [QUOTE="95cobby, post: 1479378, member: 22530"] For the 3m clear wrap.. I ended up getting an 8"x132" roll and it worked perfect for all 4 shocks and resi's along with the dual King steering stabilizers. If you just wanted to do the shocks you can subtract about 26" as the smaller king 2.0s measured at about 13 5/16". By circumference the 2.5" shock tubes themselves are a tad larger than 2.5" so the 8" wrap will fit great without trimming. The resi's were a bit closer to a true 2.5" and I had to trim the 8" wrap just slightly. A little bottle with a water/soap solution, another with a water/alcohol solution, a squeegee, and a few beers and I was good to go. Trimming and installing prolly took me a couple hours and they turned out great. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

October_2010_Aspen_Island_at_Hart_Prairie_Preserve_-_Rick_Braveheart

donor_harness

DSD

Misc_V-Drive_452

06 sick-o

450R

2013-02-12_14-58-10_487

250691_166947353368926_100001609875209_423352_3509179_n

002

photo_31

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 441 (members: 0, guests: 441)

Top