Reply to thread

Message: [QUOTE="TooMuch03, post: 598340, member: 5993"] While this is true that compounds will only be as powerful as the lp turbo can support, it is also true of single turbos. They can only make as much power as the compressor can support. Furthermore, you can run a larger turbo in a compound setup than you can in a single set up. How many guys are running a single 80mm turbo? Very few if any, but many people with compounds are using at least that size for the lp turbo. The other advantage to compounds, or the procharger system, is that you can increase boost pressure above what either turbo is capable of on its own. At a point, based on the rpm and displacement of the engine, the only way to increase airflow is with higher boost psi. Honestly, IMO, stating what a turbo can support on fuel and nitrous doesn't mean much. In theory, if you have enough spray and fuel, you can make 1200hp without a turbo at all. Also, FWIW, I just checked the highest HP fuel only PSD thread on here, Matt Moroni did 942rwhp with his 6.0, and that is what I found without doing any other digging. [/QUOTE]

Verification

Random media

IMAG00411

Me trying to balance a power stroke

excursion the 250 and the wife

Bullet proof diesel oil cooler kit install

photo_9

13_2

D80_Cover_1

2010_interior

SHAQ

drill2

Latest posts

0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Today at 2:44 PM
Aftermarket Performance
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US

Members online

Total: 1,164 (members: 2, guests: 1,162)

Top