Reply to thread

Message: [QUOTE="Dieselcraft, post: 271053, member: 734"] Here's a stock 6.4 rod for reference of difference It spun a rod bearing [ATTACH=full]81476[/ATTACH] THIS IS OUT OF THE WSM NOTE: The piston assembly must be installed with the words "Cam Side" toward the inside of the engine, along with the long side of the connecting rod big end split. NOTE: Use care when installing the piston assembly to not damage the piston cooling tubes. If the tube is bent during installation of the piston assembly, install a new piston cooling tube. NOTE: Coat the cylinder walls and piston assembly with clean engine oil before installing. Install the piston and rod assemblies. Coat the inside diameter of the Piston Ring Compressor with clean engine oil. Insert the piston into the Piston Ring Compressor. Position the piston, connecting rod and Piston Ring Compressor into the correct cylinder bore. Using a wood or plastic hammer handle, push the connecting rod and piston assembly down into the cylinder bore. [/QUOTE]

Verification

Random media

1997 ZF5 DRW

mpd_2

iphone_pics_263

2 generations of Ford guys

Runner

silver_truck_pass_side_bmf

DSCN8402

293941_214215245304283_100001474272705_597994_1362671332_n

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Today at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,298 (members: 0, guests: 1,298)

Top