Reply to thread

Message: [QUOTE="vanderchevy18, post: 957252, member: 569"] I unplugged the 42 pin connector, taillight plugs, and all the trans plugs. Then u unhooked the truck power wire from the starter relay. Then I unplugged the pcm and idm. I checked continuity between ground and the signal pins on the pcm plug and I get 1933. I pulled every fuse and relay on it. It is for sure a chafed wire somewhere. Problem is where. I may have to just pull every dadgum bit of that wiring harness out and open it all up. [/QUOTE]

Verification

Random media

2011-10-05_18-10-39_989

intercool5

Fuel

2011-11-09_18-19-23_690

IMG_20140329_233137_520

suspension all way down

Smokyred

New Tires

Boat1

IMG_20140328_213040_326

2011-11-09_18-15-18_93

Latest posts

A few turbo questions and a rant
- Latest: powerlifter405
- Today at 12:08 AM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Yesterday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Yesterday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

Total: 1,165 (members: 4, guests: 1,161)

Top