Reply to thread

Message: [QUOTE="Strictly Diesel, post: 1558684, member: 1411"] This update is SOOOOOO LOOOONNNNGGGGG overdue. I've been referring to this as "The Longest Stereo Install Ever" (that isn't some kind of crazy, high end, show build). Anyway, a quick bit about the system and then TONS OF PICTURES. Sorry for the length of this, I have it split into multiple posts. System Consists of: Kenwood DNX-696S Double DIN Head Unit (custom mount) Zapco ASP-Q1 Pre-Amp/Crossover (custom mount in AC controls location) Rockville 50 Farad Capacitor (2) Old School Orion 2150GX Amps (600W ea) (2) Old School Orion 400BDG Bridging Modules (3) Old School Orion 280GX Amps (160W ea) (2) JL Audio 10TW3-D8 Subs (custom sealed enclosure) (2) Sets a/d/s/ A6is Component Sets (front stage) - (4) Total 6.5" Midbass (2/door) - (4) Total 1" Soft Dome Tweeter (1/door + 1/pillar) (1) Set Pioneer TS-D68F 6x8 Direct Fit Speakers (rear fill) 2/0 Custom Battery/Starter/Alternator/Ground Cables DC Power 370A Alternator [ATTACH=full]181058[/ATTACH] Gutting The Interior for Sound Deadening [ATTACH=full]181059[/ATTACH] More Gutting... [ATTACH=full]181060[/ATTACH] Expanding Foam Used (carefully) in Key Places (the roof is solid and tight now) [ATTACH=full]181061[/ATTACH] Roof Getting CLD. [ATTACH=full]181062[/ATTACH] Back Wall of Cab Getting CLD. [ATTACH=full]181063[/ATTACH] Roof Getting a Sound Blocking Type Product (can't say if MLV or other) [ATTACH=full]181064[/ATTACH] I used Tons of Tesa Tape on OEM and other Harnesses [ATTACH=full]181065[/ATTACH] While I had Easy Access, I Installed some S&B Body Mounts [ATTACH=full]181066[/ATTACH] [ATTACH=full]181067[/ATTACH] [ATTACH=full]181068[/ATTACH] Dash on the Stand for Repairs, Security System and Audio Work [ATTACH=full]181069[/ATTACH] Bare Firewall Ready for CLD [ATTACH=full]181070[/ATTACH] Firewall Covered in CLD (OEM Pad was Reinstalled Over the CLD) [ATTACH=full]181071[/ATTACH] Dash Mount Tabs Covered in Tesa Tape Continued in next post... [/QUOTE]