Reply to thread

Message: [QUOTE="Strictly Diesel, post: 1558685, member: 1411"] Continued from Previous Post... [ATTACH=full]181072[/ATTACH] Pioneer 6x8s in Factory Rear Location [ATTACH=full]181073[/ATTACH] Starting the CLD on the Floor. [ATTACH=full]181074[/ATTACH] 05-07 Dash Center Pieces getting Painted [ATTACH=full]181075[/ATTACH] Upgrading to 11-16 Center Console too. [ATTACH=full]181076[/ATTACH] Floor CLD Done! [ATTACH=full]181077[/ATTACH] Laying out RCA Cables Up the Center of the Floor [ATTACH=full]181078[/ATTACH] Power, Ground and Turn-On Run Up Floor with 4" Gap. Every component in the system get Power and Ground from the Amp Rack. Key-on for the Head Unit is Amp Rack power switched by a relay. No audio connected component has ANY power or ground from ANY other location. [ATTACH=full]181079[/ATTACH] Sound Blocking Material Installed on Floor [ATTACH=full]181080[/ATTACH] Working On Custom Head Unit Mounting Brackets [ATTACH=full]181081[/ATTACH] Head Unit Solid Mounted (the plastic dash kit sucked) [ATTACH=full]181082[/ATTACH] Head Unit and Pre-Amp Test Fit [ATTACH=full]181083[/ATTACH] Head Unit and Pre-Amp Brackets [ATTACH=full]181084[/ATTACH] Test Fit of Bezel for Relocated AC Controls [ATTACH=full]181085[/ATTACH] Underdash Aux Fuse Panel for Center Console, Inverter, Upfitter Switches plus Relays for Audio and Alarm Functions (unfortunately, you have to take half the interior apart to change a fuse...oh well). [ATTACH=full]181086[/ATTACH] Assembled Dash with AC Bezel and Pre-Amp Brackets Powdercoated [ATTACH=full]181087[/ATTACH] Upfitter Switch Wires Labeled for Future Use (switch 4 controls center console inverter) Continued in next post... [/QUOTE]