Reply to thread

Message: [QUOTE="Strictly Diesel, post: 1558687, member: 1411"] Continued from Previous Post... [ATTACH=full]181105[/ATTACH] Test Fit of Dual Speaker Mount from Custom Speaker Pods [ATTACH=full]181106[/ATTACH] Fitting the Tweeter in the Door Pod [ATTACH=full]181107[/ATTACH] Steel Reinforcement Rings with Threaded Inserts for Speaker Pods (so I'm not attaching speakers to plastic) [ATTACH=full]181108[/ATTACH] Test Fitting Speakers with Reinforcement Rings [ATTACH=full]181109[/ATTACH] Pods Painted and Reinforcement Rings Attached [ATTACH=full]181110[/ATTACH] Pods Attached to Door Panel and Speakers Installed (still need to paint the screw heads) [ATTACH=full]181111[/ATTACH] Amp Rack and Equipment Fully Installed and Wired in the Truck! (this was a LOONNNGGG Time Coming) [ATTACH=full]181112[/ATTACH] Amp Rack with Seat Installed and Folded Forward Sorry again for the length of these updates. Been going too many directions and this build took way too long to complete. I started the bulk of this in January of 2021. The truck was down for about 6 months with all of the interior out and everything I did inside, then it was on the road again while I designed and built the sub enclosure and amp rack. I took it down again in December of 2021 to work on mounting the speakers in the doors, battery cables, power and ground for the audio equipment, alternator and lots of other little details...and it just came together this past weekend. At this point, I'm driving and listening and adjusting until I can get with a close friend and spend time with his ears and his analyzer to dial it in. All in all, I'm damn happy with how it came out and how it sounds, and all of the "old school" equipment I wanted to use so badly is working great! [/QUOTE]