Push button start

[Dunn]

I've done a quick push button start since the part inside the column broke. I've done a switch to the yellow 12v constant, a push button with a relay for the starter and a switch on one of the accessory wires. I need to do the rest of the wires but I don't know what each one controls specifically and the easiest way to wire it without six different switches. Anyone have suggestions, I also need a decent wire diagram so I can finish it.

 

[79jasper]

http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx

Sent from my SM-T537R4 using Tapatalk

 

[Macon]

For an inconspicuous push button, I've seen plenty of old school guys remove the latching mechanism from the old floor "brights" switch and wire it in to the starter. Works great, last long time. You'll just have to modify your floor board to accommodate it.

The rest of the "key on" wires can go to one properly rated toggle switch. I would suggest two toggles though, just to spread the load a little more.

 

[Dunn]

How should I separate them out, I've been having issues finding a decent wire diagram that tells me where each wire comes from. I found ones to what systems those wire will power