Reply to thread

Message: [QUOTE="Dirtclod, post: 1455879, member: 20061"] 263k miles! There is no play at all in the hub or at the yoke. Turning the tires while jacked up the gears that were turning were all beveled the same on the edge of the gear. I don't know know if that's normal or not. I've owned the truck for 4 years now only put 60k on it last night was first time I changed it. Now this is culprit to needing joints. I went and picked moog ujoints from autozone(rear axle at rear end which was a 295 and rear axle at carrier bearing 295)they gave me part number232 which was way smaller and had 3/4" play. Then I noticed the old one was a 331 I think. Same size as 232. So that's been an issue itself. I took it back and used 295 for both. Of course the ride is much better but still has a vibration in the rearend. I'm thinking bent axle or ebrake causing this. I'm going to pull the axle at work tomorrow and try spinning it in a threader machine. I should be able to tell, [/QUOTE]

Verification

Random media

IMG_20120223_155925

20161028_080740

2014 6.7

Smittybilt M1

OBS Fleet

IMG_20130417_183541_808

IMG_20160905_185326723_HDR

Hydroboost and power steering

18x9_xd_riots_falken_325_60r18_rocky_mountain_ats_tires

IMG_20130417_153401_644

VVASSUP Juanito's F250 05 6.0 Harley Davidson TOYO RIZE RBP SCT MBRP S&

Latest posts

Truck slipping into 4th
- Latest: blackbeauty7.3
- Yesterday at 11:04 AM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Yesterday at 8:42 AM
7.3 Performance
Indiana
- Latest: glog
- Monday at 10:20 AM
6.4 Tech
Will a 1996 F6TZ-9A451-F engine wiring harness work on a 1997 f250 HD ?
- Latest: NotThatGuy
- Monday at 12:45 AM
94-97 Aftermarket
I
A few turbo questions and a rant
- Latest: INFRNL
- Sunday at 4:05 PM
7.3 Aftermarket

Members online

No members online now.

Total: 652 (members: 0, guests: 652)

Top