Reply to thread

Message: [QUOTE="TARM, post: 155636, member: 578"] So what has been found out? They all, as HRT stated, put out great work. If you are looking for the best price and staying within the typical 250/100 or under sizes Rosewood is hard to beat. When you go larger you are going to get awesome performance from Nate@Unlimited, Cass @FullForce, or Dave@Swamps. Take some time out of your day and give each a call and do some Q-n-Aand pick who makes you warm and fuzzy. I personally went with Nate and could not be happier. Every one listed has customers with low and high hp rigs that feel likewise. In this case it really is kinda hard to make a bad choice in picking a builder out of those choices. To address the flow chart comparisons from the small amount of knowledge I have picked up over the last couple years there are extra mods that can be done to injectors to reduce internal restrictions and increase flow and speed. That work with some injectors is at an extra cost. Without knowing exactly what work was done to each set of injectors you can not be sure its an apples to aples. Volume of an injector does not effect actual flow rates. 250cc-300cc-750cc vol capacity can all have the same flow rate. Now if you asked each builder to put out a injector with specificl specs and to pull out all the stops you could then have a head to head. [/QUOTE]

Verification

Random media

IMG_20150423_204900032

20170502_212604

OilField Pictures

IMAG1018-1

935345_10151587373928866_2074320702_n

292490_4050142579556_1897481452_n

1997 ZF5 DRW

Ben's 96

phone_2017_224

1586

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Today at 8:52 AM
7.3 Tech
A few turbo questions and a rant
- Latest: Tiha
- Today at 8:22 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: RascalMafia
- Yesterday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

Total: 1,336 (members: 2, guests: 1,334)

Top