Reply to thread

Message: [QUOTE="Strokinbronco, post: 1563916, member: 30626"] So I've had my compounds up and running for a little while now and I'm fairly happy with the setup but some changes need to be made. I currently run a s369 / 88mm gt55 combo with 400/200s and I feel that the s369 is just a little lazy to spool, once it's lit it pulls incredibly hard but down low is smoky. I also have to run a larger 1.10ar housing and large amounts of wastegate to keep drive pressure acceptable and I'm worried about the smaller shaft size of the s300 so I'm stepping up to an s400 frame turbo. My question is what would be the better option, a s464 or an s467? I want good spool up but I also don't want to lose a bunch of top end power. I'll also be pulling the stage 1 cam out and putting in a stage 2 and tightening up the housing on the gt55 from 1.23ar to a 1.08ar while I'm fabbing up the new compounds. [/QUOTE]

Verification

Random media

0041

Smokyred

612.8 HP April 2011

IMAG1599

dieselX

DSC0080-2342323186-H

26213_365896378545_615243545_3684468_4612846_n

user123603_pic33610_1373077503_thumb

IMG-20111127-00002

ptm_front

Latest posts

0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Today at 2:44 PM
Aftermarket Performance
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US

Members online

Total: 1,241 (members: 2, guests: 1,239)

Top