Reply to thread

Message: [QUOTE="6.7Bison, post: 1543383, member: 32432"] Glad to hear some of you can back up my hypothesis! This gives me hope I won't have to do any further modifications to get more cool air to the intake. For my own purposes and to keep this write up and review complete I will still gather data after the install and post my findings. Thanks! Sounds like I'm on the right track to being informative and unbiased. You are correct the turbo heats up the air a ton and the intercooler is in place to help bring the temps back down. I've done some thermodynamics math with a lot of assumed values and raising the intake temp from 70F to 75F only decreases the mass airflow by approximately 0.75 lb/min. Not a whole lot and I would probably never notice real world. You are probably correct that just the larger element would make up this difference... But if I can have more air AND colder air AND a lower pressure drop from a new intake setup... :demon: I like performance and efficiency but don't like compromise. [/QUOTE]

Verification

Random media

Magneto_side_v2

photo_8_1

IMG_20170708_195221444

eleanor_part_two_30_

Resampled952011-09-189510-08-0495532

2008 King Ranch motor work

my truck

DSCF1710

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 564 (members: 0, guests: 564)

Top