Reply to thread

Message: [QUOTE="circled-mistake, post: 1258505, member: 16375"] Not too sure who might be able to help, but I have the MPG MAX water meth kit installed on my 2004 F350 6.0... (part # 50015) From what I gather in the instructions the MPG mode has a start point and a MAX point , where the operator will set a starting point (say 10psi) and a max point (say 20psi) where the controller will vary injection rate until it hits 20psi, where 100% inj rate is achieved... Then after that there is the POWER MODE, where a second stage or nozzle can be utilized to inject a higher percentage at a specific boost point (say 25 psi)... Since the 100% injection rate has already been achieved in the mpg mode, should the power mode already be at 100% to achieve maximum performance? Or does the kit automatically re adjust and ramp up as needed?? I cant remember what the kit or the controller did before as it has been a while since i had used MPG mode (I have been towing lots)... Any help is appreciated!! [/QUOTE]

Verification

Random media

My 96 stroker

photo_25

IMG-20111127-00002

asiana

RImsss

elbow_2

Tac 38

6_4gate_003

IMG_20161130_080920871

109

Latest posts

A few turbo questions and a rant
- Latest: powerlifter405
- Today at 12:08 AM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Yesterday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Yesterday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

No members online now.

Total: 1,176 (members: 0, guests: 1,176)

Top