Reply to thread

Message: [QUOTE="TripleE44, post: 1137816, member: 94"] To do it the right way, and keep your truck steering and driving the same, you need more than just the spacer. Sure it would work to just throw a spacer on there but it's far from ideal. Off the top of my head: Adjustable trac bar(if you don't have one) or a trac bar drop bracket. You could do without this but your axle would be off center. Extended sway bar links or drop brackets Brake lines wouldn't be a bad thing to do. I ran stock ones on 7'' lift on my 08 and it wasn't a huge issue but we did have to modify the bracket down next to the coil. Drop pitman arm Possibly shocks, but hard to say. I know some are 4-6'' height but some are 2-4''. Something with the radius arm assuming you don't have an adjustable 4-link or something like that. Another thing to think about is 7'' Icon coils from PMF are only $350 and you wouldn't have to run the spacer. [/QUOTE]

Verification

Random media

eleanor_part_two_15_

DSCF3418

Dipstick tube oring

Trucks

with canopy on

IMAG00421

971447_10200790904327898_751607360_n

Flo-Pro 6.7 delete kit

Pro_Comp_Steering_Stabilizer

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 8:00 PM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

bismic

Total: 1,329 (members: 1, guests: 1,328)

Top