Reply to thread

Message: [QUOTE="Long Gone, post: 1529845, member: 31343"] Got new MAT sensor and get the same results (-40 when plugged in and 419 unplugged) as with the original. Very consistent from one sensor to the other. No change in temp reading with movement of the wiring harness, and am not finding any loose/corroded grounds. Since the MAT (IAT#2) is an input to the PCM I am thinking the PCM is having a problem. The temp read out in the cab seems to read correctly so it must be getting it from somewhere else (IAT#! or ?). Does anybody know if there are any upgrades or any changes made through the years, are the different years interchangeable or anything else I need to know. [/QUOTE]

Verification

Random media

This is the lay out of the door wire harness for a 08

2011-11-23_12-26-15_64

theres-door-now-get-****-out

29822_3970216809878_606567880_n

SHAQ

20140901_175315

amaple_grove_100

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 8:00 PM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

Blitzin247

Total: 1,182 (members: 1, guests: 1,181)

Top