Reply to thread

Message: [QUOTE="TrickTruck, post: 1495874, member: 6044"] I know this project is kind of old, but I thought y'all would like to see the rear bumper design. I was contacted by one of the front bumper customers who really wanted the rear to match. So I gathered up all the front customers and asked if they wanted a rear one and got enough interest to do a run. Here's some renderings, this is the final design. Feedback is welcome, maybe if it's a good idea I'll change something before going to manufacturing. The wrap around is intended to work with Bushwacker style fender flairs and protect the corner of the truck from incidents. With the flairs on, the flair should stick out a smidgen past the bumper. I have this style on my Toyota P/U and it’s saved it countless times. I hope you all like it. That's the Rigid flush mount light and backup sensors integrated into it. Receiver hitch is integrated and should prove to be several times stronger than stock. [img]https://www.unlimitedengineering.com/wp-content/uploads/V8.1RearC-Iso-1024x599.jpg[/img] [img]https://www.unlimitedengineering.com/wp-content/uploads/V8.1RearC-Top-510x225.jpg[/img] [img]https://www.unlimitedengineering.com/wp-content/uploads/V8.1RearC-Side-510x204.jpg[/img] Bottom view, shows room for a big spare up to 37" [img]https://www.unlimitedengineering.com/wp-content/uploads/V8.1RearC-Bottom-510x551.jpg[/img] Section view showing internal ribs [img]https://www.unlimitedengineering.com/wp-content/uploads/V8.1RearC-Section-2-510x255.jpg[/img] Anyway, I figured you guys would enjoy seeing the design and you've given me good feedback in the past so feel free to hit me with what you are seeing. [/QUOTE]