Reply to thread

Message: [QUOTE="Charles, post: 1342068, member: 103"] With the 38R and 1.15 housing on my gray truck I had boost as follows: 1200rpm = 3.5 to 4 psi. 1500rpm = 8 to 9 psi 1750rpm = 18 to 19 psi Anything above that is pretty much 30psi. Those values are sitting at the mentioned rpm and building boost, not making boost higher and then pulling back down, which I don't think would be a good comparison here, although the numbers would be higher. If the superconfuser is making 7psi at 12 hundo, then it's got my 38R beat. I'd like to see what a 1.0 housing would do, but then again, I don't want more power below 2000rpm, so... if it did make more boost I'd probably just have to pull more fuel. [/QUOTE]

Verification

Random media

cup

558206_4175518193868_289576718_n

FC65CDF9-18A1-423C-B0B5-C45572D26E5F

194211_4064729304775_152922196_o

front set-up

CID&FDCS

6_4_billett_heads_2

4E642ABF-7505-4CBA-ABA8-4FD23A040A4F

tulasideviphotography_2011001print

DBCCD618-8AF4-454F-B99E-0914E606D268

JD's whip

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 688 (members: 0, guests: 688)

Top