Reply to thread

Message: [QUOTE="STROKIN N STYLE, post: 640690, member: 197"] So after 250 or so dyno runs with the CR engine, the guys desided to give it a once over to check things out. While it's down getting freshened up it will be getting the stage2 ported heads and a cam. After it is reassembled it'll be ran on the dyno again with a single turbo to make sure all is good after the porting and new cam. Then the big charger will be added to the mix. Keep it mind, the 1150 pulls were on stock-ish heads and a stock cam with a single charger. After speaking with Jon on the phone for a while, I feel pretty confident that TS isn't out of the question for this year. There is a lot of work to be done, but the guys at Swamps want my truck on the track as bad as I do! I am getting antsy to get back in the seat! And, after it's up and running good, a makeover will be taking place. New front end, new paint, wheels, and hopefully some suspension. Hoping to have all that done by Nationals. Stay tuned [/QUOTE]

Verification

Random media

step_9

Big_Red2

new_20-12_

The Truck

Truck_1

2008 6.4L pic12

old truck

phone_2017_224

E99_Y

Powerstroke

uploadfromtaptalk1320025351052

Big_Red

Latest posts

I
7.3 LPOP Problem
- Latest: INFRNL
- Today at 4:04 PM
7.3 Tech
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Yesterday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Yesterday at 1:00 AM
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,339 (members: 0, guests: 1,339)

Top