Reply to thread

Message: [QUOTE="KCTurbos, post: 998733, member: 13852"] Sounds like a stage 3 turbo will fit your needs pretty well. With 205s you should be well into the 600hp range. With that large of nozzles tuning will be a little difficult without having to sacrifice something. Those 150% nozzles are going to dump a ton of fuel fast!!! If you are going away from a non-vgt turbo then you might think about a slightly smaller nozzle like 75% or 100% to help control your egts and fuel dumping abilities down low and while cruising. I have guys that tow upwards of 15-20k with a KC 68mm stage 3 and larger injectors... it is all in the tuning and rpms. Your truck is not going to be happy towing at 1500-1800 rpms... you wanna keep it more around the 2000-2500 rpms to keep the turbo in a more efficient area of the compressor map. [/QUOTE]

Verification

Random media

Duramax hauling grain truck

8_LUG_Bragging_Rights_July_2012

NL64PSHP

1591

558206_4175518193868_289576718_n

DSCF1105

Sheltered home for few months... To build bigger n better

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

AA7FB336-D322-4DD9-8017-CB9D2134FC8B

2004 F250 Super Duty XLT Super Cab

Latest posts

Fuel sending unit and wheel studs
- Latest: Powerstroke Cowboy
- 3 minutes ago
7.3 Tech & FAQ
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 7:47 PM
6.4 Aftermarket
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket

Members online

Total: 723 (members: 4, guests: 719)

Top