Reply to thread

Message: [QUOTE="bigrpowr, post: 1475063, member: 806"] the small tube is not cut on a 45 because the outer section is, which in turn, when installed at the correct angle, forces it on to a 45, so it doesn't have to be angle cut. as long as the 45* cut and top stem is aimed forward and parallel to the exhaust, it will draw. 5" will draw less at idle , but either size exhaust will flow more than enough over the fitting to draw. the ones you are seeing most likely don't have the weldable edge cut at a 45* . [/QUOTE]

Verification

Random media

ADgerotor2

H&S 6.7 delete kit

DSCF6270

My TRUCK

09 6.4

AA7FB336-D322-4DD9-8017-CB9D2134FC8B

Mishimoto 6.4 Radiator

IMAG0308

waste_gate_installed

20170502_2125491

Latest posts

S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Today at 10:27 AM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ

Members online

No members online now.

Total: 826 (members: 0, guests: 826)

Top