Reply to thread

Message: [QUOTE="08BIGRIG, post: 874282, member: 3985"] So today I did some tests to see what is going on with the pump. I first started it up outside and checked the fuel pressure at the Air Dog pump as well as at the fuel block on the Air Dog upgrade. Fuel was just literaly pouring out of the pump and onto the ground. At Air Dog=15psi At block=10psi One thing that I did notice is that the regulator was making a little noise when I just turned the key to the on position and not running. I don't know if that is normal or not, but it could be an issue. So then I pulled the truck into my garage and turned on the furnace to 75*. I waited a little over an hour and went back out into the garage and started the truck up. Not a single drop of fuel came out of the pump. I went to the store just a minute ago and bought a new bottle of Power Service Anti Gel and dumped about half it in the full tank of fuel that is in the truck. I am wondering if the fuel is getting too thick and starting to cause issues until it warms up. It is a possibity and I will give this a try. The fuel around here is treated at the pumps, but maybe just not enough. I don't know but I am going to give this a try and see what happens. [/QUOTE]

Verification

Random media

AE_wheel

3DA5AC75-B2F6-4464-9BEF-05ED5099C68F

Sandy Hook never forget

orca-image-1538687988750_jpg_1538688013822

Uniden_PC68LTW

truck28

Misc_042

Misc_V-Drive_452

No Limit

New Procomp tires

Latest posts

N
Ford 7.3 Passenger Bank Dead
- Latest: NitroJoe
- 45 minutes ago
7.3 Tech
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Today at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Today at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech

Members online

eng53ine

Total: 714 (members: 1, guests: 713)

Top