Reply to thread

Message: [QUOTE="Morgan@Midwest Diesel & Auto, post: 1149882, member: 8143"] You need to use manifold pressure, not LP boost. I usually pull it out of the hot pipe. T the boost line to feed each regulator and then run the individual regulators line out to their respective wastegate top port. Leave one bottom port open on each gate to vent. You need to get enough spring in each gate to be able to make about 2/3 desired boost without adding any air pressure. Then use the air pressure regulator to add more boost from there. We usually set the hp to make 30 psi on spring alone and the atmo to make 30-35 as well. Then add more air from the regulators to reach say 35-40 on the hp and 40-45 on the atmo. That is if you want to drive them that hard. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

Picture_040

jeep_engine_polished1

trucks2

FB_IMG_1524919656191

08 bucket seat panel trim

1997 ZF5 DRW

Capone

phone_pics_023

'07 5.9 Cummins

OUO 525

Latest posts

J
Show & Go/Going to Try this Out combo Build
- Latest: Jonnydime
- 39 minutes ago
6.4 Aftermarket
Truck slipping into 4th
- Latest: ju015dd
- Yesterday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket
2000 f350 dually lariat
- Latest: ju015dd
- Monday at 8:19 AM
7.3 Aftermarket

Members online

Vikicax

Total: 1,214 (members: 2, guests: 1,212)

Top