what do you monitor?

[sleeps]

Just curious to see what people monitor on their trucks and what with. What do you have setup to monitor on your device like the insight and what do you have individual gauges for? Seems everyone is different.

 

[Coxey Diesel]

I've got EGT, boost, and trans temp on the column and EOT, ECT, EBP, ficm voltage, and trans gear on the CTS. Should have a fuel pressure gauge on the column when it gets delivered.

 

[Zmann]

My insight has
boost
EOT
ECT
batt voltage

exhaust back pressure , this parameter I change a lot some days its trans temp or whatever I may want to keep an eye on

FICM output

I have a standalone digital gauge with alarm for EGT and one for Fuel PSI

 

[SSpeeDEMONSS]

Analog are boost, pyro, trans, fuel pressure, and voltage. The quad commander had ECT, boost, and something else. I want ECT, EOT, and drive pressure when it's back on the road.

Garrett

probably getting paid at work to post this from my bionic

 

[Jeremyleggett07]

Edge Insight monitor FICM voltage...tranny temp....EOT/ECT....boost.... Speed-o.....gear selection TC lock.... Sometimes batter voltage

 

[bad moose]

Edge Evolution. Boost, EGT, ECT, EOT

 

[ncollins64]

i have a dashdaq from spartan. boost, egt, fuel rail pressure, tq convertor slip, exhaust back pressure, oil temp and coolant temp.

 

[01PSD]

Speedometer... LOL

 

[SmokedF747]

Boost, Fuel pressure, Pyro on the Pillar. EOT, ECT, TFT, Gear&TC Lock up, IPW on the CTS

 

[Mar00n6liter]

SCT Live wire TS. Boost, EOT, ECT, FICM voltage, battery voltage. I don't have EGT but I can get a sensor and hook it up but you can monitor , load, accelerator position gear injector pulse width and a whole bunch of other stuff you probably don't necessarily need

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

 

[Jeremyleggett07]

Speedometer... LOL

I do it cause where my CTS sits I can just glance over a tad and see it rather than look down at the cluster

 

[stonepusher]

Fuel psi, egt, boost, and trans temp on the pillar......edge cts has eot, ect, icp voltage, pw, and icp psi.

 

[Koda22]

I got boost, egt, tranny, and volt on the pillar...on my edge I got ect, eot, speed, and the fourth one varies depending on how I feel....

 

[Justin@DP-Tuner]

When I drive the 6.0L I use the Infinity to monitor. I usually watch FICM voltage, ECT, EOT, TFT, MGP(boost), EGT, battery voltage, TQ converter lockup, gear selected, pedal position, VGT duty cycle(just for fun), and ICP.

 

[07powerstroke91]

On the Insight I have EOT, ECT, TFT, and EGT. Then I have a separate gauge for fuel pressure.

 

[smokedout250]

A-pillar boost, pyro, trans, on my gryphon icp, eot, ect, Ficm voltage


Sent from my iPhone using Tapatalk

 

[Mixedbreed]

On my LiveWire I have boost, EGT, TFT, EOT, ECT, and battery voltage

I would love to get a different tuner and measure stuff like FICM and all that other cool stuff but I ain't got the money yet

 

[Short Bus]

Eot, ect, boost, trans temp,egt

 

[lzam6285]

I've got the SCT Live wire,boost,coolant temp, oil temp, FICM voltage, trans temp, battery voltage, engine load.

 

[Lilpooh]

I use DashBoss, too many to list, I can watch 24 PID'S with a swipe of the screen. The main PID's I monitor are ECT,EOT, FICMv, ICPv, ICP Calc PSI (true ICP psi when tuned). Other than that, the rest are used for trouble shooting.