Will this wheel/tire combo work for a 4 inch lift?

hotrod09 · Oct 28, 2015

Hey guys, I'm new to the forum here and I've gotten a ton of information and finally decided to sign up. Anyways I've got a 2011 f250 6.7 with a 4 inch Zone radius arm lift. Currently I am running 35x12.50r20 on 20x9 (+1 offset) wheels and I am wanting to go up to 37x12.50r20 because I'm wanting the wheel wells to be filled up some more. Is anybody currently running this setup and would I need to do any trimming to get them to fit?
Thanks

WHY NOT · Oct 28, 2015

You should be fine if you are sticking with the 20x9's. Worst comes to worse you will have to pull back the fender liner and maybe space the front bumper out a little bit. Bot are very easy to do.

TripleE44 · Oct 28, 2015

WHY NOT said:
You should be fine if you are sticking with the 20x9's. Worst comes to worse you will have to pull back the fender liner and maybe space the front bumper out a little bit. Bot are very easy to do.

This ^ I'm running 37s on 3.5'' and just had to push the liner back, then remove the bottom bolt on that bracket on the backside of the bumper and beat it out of the way. It only took like 1/4'' on that bracket max. You can't even tell anything ever happened.

hotrod09 · Oct 28, 2015

Thanks for the help guys. What do you have to do to push the fender liner back?

TripleE44 · Oct 28, 2015

All I did was kinda fold it/bend it back out of the way. I know some people drill a small hole and run a zip-ty to it, hook the zip-ty around something and pull it that way also.