Reply to thread

Message: [QUOTE="6.0 Tech, post: 1505722, member: 23001"] I use a test light to check both things mentioned. Use a hi impedance one, like one with a glass fuse for a bulb in it, not an led one. For the gpr put test light alligator clamp on ground and tip to the gpr, should light up bright. For the glow pligs, test loght alligator clamp on positive, tip to uvch. Should light up bright, if its dim or doesnt light up, failed glow plug or harness. I like the test light method, as it loads the circuit. You can ohm out good with only 1 or 2 strands in a wire due to how the ohm test is done, a load test will show that as hi resistance. But it does sound like youve got a uvch problem, or multiple glow plug issues. May be a good idea to change it all for piece of mind. [/QUOTE]

Verification

Random media

Got the decals

Mishimoto radiator

Black Betsy.

11-8-2014

Pic upload test

SHAQ

original_eleanor_1_

IMG_20140101_211738_431

safe_008

shock_porn

joe_hueser_black_front1

Latest posts

A few turbo questions and a rant
- Latest: powerlifter405
- Today at 12:08 AM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Yesterday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Yesterday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

No members online now.

Total: 1,319 (members: 1, guests: 1,318)

Top