MorganY
New member
Well, the time has come for Rick Ross to go under the knife, once and for all until the motor goes kablooey. HUGE thanks to Colton (Super08Duty) and those at Malek services for letting me use their shop, and for Colton taking charge on the paint. More thanks to those who helped down below.
Here's the truck:
Build List:
New heads
Hamilton springs
Smith bros pushrods
62/68/.70
78/96/1.10
50mm E.D. gate
More oil (Thanks Shawn and Ivan)
DIY ported intake manifold
~275cc injectors
Water Methanol
Possibly nitrous
And some new exterior:
Black bumpers and grill
Complete performance headlights
As for the injectors, I am going that large so I do not have too much oil, and also because my 27,000 mile injector bodies are warped, plunger is stuck in a few sticks, fuel will be pulled back to save the rods as long as possible....Thanks Shawn for the help!!
New heads
Switching over the springs
New springs installed
New heads on, Colt started on the paint. Yes there are standpipes sticking out of the heads lol
More updates to come, taking a break on it until the New year!
Here's the truck:
Build List:
New heads
Hamilton springs
Smith bros pushrods
62/68/.70
78/96/1.10
50mm E.D. gate
More oil (Thanks Shawn and Ivan)
DIY ported intake manifold
~275cc injectors
Water Methanol
Possibly nitrous
And some new exterior:
Black bumpers and grill
Complete performance headlights
As for the injectors, I am going that large so I do not have too much oil, and also because my 27,000 mile injector bodies are warped, plunger is stuck in a few sticks, fuel will be pulled back to save the rods as long as possible....Thanks Shawn for the help!!
New heads
Switching over the springs
New springs installed
New heads on, Colt started on the paint. Yes there are standpipes sticking out of the heads lol
More updates to come, taking a break on it until the New year!
