Recent content by sledfreak

Thanks, this will be my 4th cord and 3 block in 7 years isn"t to bad

My power block started popping fuses, changed the one in the panel because it wouldn't turn on now the block keeps popping, any ideas

Well I"m at a loss, I got new tires on the truck, so I punch in the rolling diameter 33.54 and the speedo's 3 mph faster than the gps, so I punch in 34.00, it's still the same, so I punch in 34.58 which is the actual tire diameter and still the same 3 mph faster than the gps says, I don't know...

I'm deleted so i need from down pipe back , already have 4" down pipe. Magnaflow makes good stuff and good sound on gasers , had a couple of their kits before, but for 6.4 diesel i don't want to spend that much because i'm keeping it straight piped. thanks for your response though.

I've had my flow-pro 4" aluminized exhaust for 7 years now it's starting to rust pretty good, looking to replace it, was thinking about going duals. My ? is any of you guys went from single to dual and notice any performance difference, i'm thinking it would sound better, what are your thoughts...

Mine did this 1 month ago, replaced sensor passenger up pipe, sunrise ford hooked me up for less than 50 bucks, take the tire off, loosen the fender well,kroil the sensor real good for a day, good 12 point 14mm brake line wrench and a small pair of vice grips, couple hour of knuckle busting fun...

I to agree $557.98 is a gouge of a price, their is no way it cost half that to make, i don't care how good it looks, it's definitely 80% mark up, it's my opinion.

I believe it's refined by citgo.

What about mystic 15w 40 semi synthetic, comes in 2 gallon jugs for $23

when you open your custom file it's listed as f64 eng mcc, and trans is f64tranmcc.also if you don't have the stock rims and tires make sure you tell what you have or you can change it in your engine file before you email it to them.Really you should call them they will tell you what to do, i...

when you stick your card into the reader and export it to the computer, bring the files up, mcc tunes will be in the custom file. Also you need to download max calibration software from the h&s site to read them and adjust them,when you want to download them into the truck,put the card into your...

I run Mobil 1 turbo diesel with opti-lube oil fortifier,been running it for 50k miles, works for me plus farm n fleet has it for $23 a gallon.

fiber

Did you guys try putting 3/16 garloc gasket material in the bottom of the hole, so it won't bottom out,the trick works good on big valve bonnets,in high torque applications.

That is cool,but isn't that were the 4-wheel drive knob go's.